SQUIRREL PINS SEWING TUTORIAL

When I first started to sew, every piece of fabric seemed important.  After each project I would end up with a pile of scrap fabric that I just couldn’t bring myself to throw out.  I knew that I could use the fabric for something, but I just didn’t know what!  I eventually created these squirrel pins from my leftover felt to give to the little people in my life.  Each pin uses about a 3” x 6” piece of felt.  If you have larger pieces of felt, you could easily enlarge the pattern to create adorable squirrel pillows for your child’s bed.

Supplies:

My free pattern

Grey felt

White felt

Grey, white and red thread

Polyester fiberfill

Safety pin

Super glue or a glue gun

NOTE: this pattern is for domestic use only and cannot be used commercially or sold. 

Method:

1)  Print pattern and cut out templates.

     2)    Cut felt according to template.

     3)    Sew white cheek piece onto face.

      4)    With right sides facing, sew top of head and sides of head – do not sew ears and bottom of head yet.

      5)    Turn felt right side out and sew eyes, nose, mouth, a few running stiches across forehead and little hearts on ears.

     6)    Sew ears together and trim any excess.

      7)    Stuff head with fiberfill and sew the bottom closed.

     8)    Use super glue to adhere pin and pin cover to the back of the squirrel’s head.

And you’re done!  Give these to your little ones on Valentines Day, and, if you have the time, make extras for them to share with their BFF’s. 

FALL FASHION REPURPOSED: Crop top and high-waisted skirt DIY

With temperatures dropping in San Diego, I started riffling through my closet for some autumn-appropriate clothing.  Finding very little that excited me, and even less that still fit, I was feeling  defeated.  I was resigned to the fact that I’d be raiding my husband’s side of the closet for the next few months.  That was until I stumbled upon a dress I picked up in a thrift store a few years ago: a double-breasted knit dress.  I no longer wore it, and I had long contemplated getting rid of it, but the dress still had potential.  I love to reimagine or reinvent something that I already own, giving it a new life and saving it from the landfill.  This dress seemed the perfect candidate.  I decided to make it into a little cropped top and high-waist skirt, similar to one I saw Solange Knowles wearing.  (Yes, the girl who wears khakis and hiking boots for a living occasionally reads fashion blogs!)  

There was only one problem: I had never sewn anything more than a hem, so this was going to be a steep learning curve.  It turned out it wasn’t so hard after all and I’m thrilled with the end result.  My new (old) outfit is perfect for San Diego’s mild autumn.

Supplies:

Knit dress

8” wide coordinating knit fabric (length approx. = waist measurement + 1” seam allowance)

Thread

Chalk

Scissors

Step 1:

Try the dress on and use chalk to mark your real waist.

Step 2:

Cut the dress in two at real waist marking.

Step 3:

To make the top more fitted I added 2 darts to the front and 2 to the back. 

I used a pattern block to mark the location of my darts.  If you don’t have one available, this handy youtube demonstration will show you how to mark and sew them in the right place. 

Step 4:

Mark and sew two pleats in the front of skirt and two darts in the back. 

Step 5:

Cut two strips of the black knit fabric, one 2” wide (edging for top) and the other 6” wide (waistband).  Calculate the length of strips required by measuring the total length of cut edge of top or skirt and adding 1” for seam allowance. 

Step 6:

Fold strips in half and iron flat.  Fold raw edges in towards center and iron. 

Step 7:

Sandwich the raw edge of your top within the edging.  Pin and sew.

Step 8:

Sandwich the raw edge of the skirt within the waistband.  Pin, sew and you’re done!

I love my new crop top and skirt.  They are so much cuter than my husband’s over-sized sweaters.

 

SHOU SUGI BAN OUTDOOR TABLE DIY

When we needed an outdoor table for our recently completed patio, I figured I would have to build one myself.  A few years ago, my husband Jeremy designed a beautiful table for our front deck.  However, being finished in polyurethane it needed constant maintenance.  As he watched the polyurethane crack and mold grow underneath, he was in no mood to make another.  That was until I uttered the words “Shou sugi ban”.  His eyes immediately lit up.  I had him hooked! 

Shou sugi ban, or Yakisugi, is a traditional Japanese method of burning cedar (sugi) before finishing it with natural oil.  Normally used as exterior siding, the charred wood is pest and rot resistant for up to eighty years.  So, charring is a beautifully simple way of ensuring the longevity of wood.  Here are a few contemporary examples.

Clockwise from top: Fujimori's charred cedar house, Ubon, Hunsett mill, De Noorderparkbar, THOUGHTBARN office, Havet cabinet.

  

Though a few expletives were uttered during the making of this table (which come standard with my husband’s DIY projects), it was easy to make.  Once charred, the wood appears a silvery grey or shiny black depending on how the light hits it.  We love how this table turned out. 

Materials:

Hairpin legs (we bartered for a second-hand set at a local street fair, but you can purchase them new here)

2 laminated pine panels 47 ½ “x 15” x 1 ½ “

2 pieces of pine 27 ½” x 5 ½ “x 1” (supports)

1 Bernzomatic UL100 basic propane torch kit

12 wood screws 1 ¼ “

12 sheet metal screws 1 ¼ “

White Rust-Oleum spray paint

Linseed oil/ other natural oil

Sponge brush

Wood glue

Sand paper 

Drill

Clamps /tie downs

Step 1:

Use sandpaper to remove any rust from the hairpin legs and to help the paint adhere.  Spray paint them in a well-ventilated room.

Step 2:

Glue the two pieces of laminated pine together and clamp.  Let it rest on a clean, flat surface for approximately 2 hours while the glue cures. 

Step 3:

Glue the supporting pieces of pine approx. 5” from the edge of either end of the table.  Evenly space six wood screws along the length of the supports and screw into wood, making sure they go into the base of tabletop.

Step 4:

Assemble the Bernzomatic torch kit according to instructions.  Light and begin burning the wood, following the grain. 

NOTE: Burn the tabletop in an area clear of vegetation. 

Step 5:

Once both sides are sufficiently charred, use a brush or wet rag to wipe off excess soot.

Step 6:

Use the sponge brush to apply several coats of linseed oil to the tabletop.

Step 7:

Use the sheet metal screws to attach legs to tabletop.

Sit back and enjoy your new table:) Thanks for visiting. Nicole