TRIBAL PRINT BACKPACK DIY

This tribal print backpack began as a pillow from India.  I loved the fabric, but I didn’t like the shape or size of the pillow.  It went into storage for a few years until I unearthed it while preparing for a garage sale.  It seemed like such a shame to leave this beautiful print hidden from the world, so I decided to create a backpack for our trip to Switzerland.

Materials:

My free template
30” x 20” Heavyweight fabric

12” x 15” Costume pleather

12” x 15” Felt

2.5 yard 1” Nylon webbing

1 yard Drawstring

2 Plastic adjusters

1 Buckle

Black thread

Pins

Chalk

Scissors

Iron

Sewing machine

Method:

1) With the wrong side facing, measure 2 ½'' from the top of the fabric and mark with a pen.

2) Fold fabric ½“ from top and iron.

3) Fold fabric another 2'' to meet the pen mark you made. Iron flat and sew edge.

4) Insert the drawstring.

5) Fold fabric in half width wise. With right sides facing, sew the edge together. Use a zigzag stitch to finish edges and prevent the fabric from fraying. The fabric should now form a cylinder with the drawstring at the top.

6) Cut two pieces of nylon webbing 6.5” long. Thread plastic adjusters onto the webbing. Fold webbing in half and sew adjusters as shown in image below.

7) Cut base pieces from template. With wrong sides facing, sew edges together.

8) Pin base and adjusters in place. The adjusters were set 8” apart. In the photograph you can see that I’ve placed the fabric seam down the center back.

9) With right sides facing, sew base to backpack. Turn backpack right side out.

10) Cut two 28” pieces of nylon webbing for straps. Pin straps at an angle to top of bag, approximately an inch from the back center. Sew in place. Thread the straps through adjusters.

11) Cut one piece of nylon webbing 3” long. Thread buckle onto webbing. Fold webbing in half and sew as shown in image below.

12) Cut one piece of pleather and one piece of felt according to flap template. With wrong sides facing, sew together.

12) Cut one piece of nylon webbing 8” long.  Pin webbing to the felt in the center of flap. Sew webbing in place.

13) Pin and sew the flap to the backpack right above straps.

14) Pin buckle to the front of backpack and sew in place.

Note: If you plan on carrying heavy items, reinforce the straps by sewing extra nylon webbing perpendicularly across strap ends.

Any questions or comments are always welcome and appreciated. Hope you have a good weekend, Nicole.

FAUX LEATHER SWEATER DIY

Grüetzi!  I’m excited to be blogging from Switzerland.  The husband and I will be based here for the next three months while he is a visiting fellow at the University of Basel.  I finally have a chance to practice my non-existent German on the unsuspecting masses.

Before I left home I reinvented a few items of clothing and some decorative pieces, which I’ll share in the coming months. I’ll also post a few travel photos and tips, so check back often for some European inspiration.

First up, I converted my husband’s old sweater into a fitted faux leather top.  I loved wearing his oversized sweater on wintery days at home.  But it turns out that the moths in my closet loved it too.  When the sweater became too embarrassing to wear, I decided to reinvent it by keeping the wool sleeves and adding a faux leather body.  Now I have a new piece to wear around Europe, which, judging by all the faux leather jackets in Switzerland, is bang on trend.

Supplies:

Old wool sweater

1 yard of costume pleather (should have some stretch if you want a more fitted top)

Black thread

Scissors

Chalk

Method:

1) Carefully remove sleeves from body.

2) Use the old sweater bodice as a template to cut a faux leather back and front.  If you prefer a more fitted top, cut faux leather to preferred size, using the armholes of the original sweater as a template.  Just remember to add a ½ inch seam allowance.

3) With right sides facing, sew front and back of bodice together.

4) Insert the sleeves and attach to bodice.

Why not reimagine an old piece of clothing from your closet? If you’re stuck, send me a photo and I’ll try my best to help. Nicole

SQUIRREL PINS SEWING TUTORIAL

When I first started to sew, every piece of fabric seemed important.  After each project I would end up with a pile of scrap fabric that I just couldn’t bring myself to throw out.  I knew that I could use the fabric for something, but I just didn’t know what!  I eventually created these squirrel pins from my leftover felt to give to the little people in my life.  Each pin uses about a 3” x 6” piece of felt.  If you have larger pieces of felt, you could easily enlarge the pattern to create adorable squirrel pillows for your child’s bed.

Supplies:

My free pattern

Grey felt

White felt

Grey, white and red thread

Polyester fiberfill

Safety pin

Super glue or a glue gun

NOTE: this pattern is for domestic use only and cannot be used commercially or sold. 

Method:

1)  Print pattern and cut out templates.

     2)    Cut felt according to template.

     3)    Sew white cheek piece onto face.

      4)    With right sides facing, sew top of head and sides of head – do not sew ears and bottom of head yet.

      5)    Turn felt right side out and sew eyes, nose, mouth, a few running stiches across forehead and little hearts on ears.

     6)    Sew ears together and trim any excess.

      7)    Stuff head with fiberfill and sew the bottom closed.

     8)    Use super glue to adhere pin and pin cover to the back of the squirrel’s head.

And you’re done!  Give these to your little ones on Valentines Day, and, if you have the time, make extras for them to share with their BFF’s. 

COPPER AND MARBLE CANDLEHOLDER DIY

Happy 2014!  Having just returned from my beautiful hometown of Cape Town, South Africa, I am inspired and excited to begin planning my new ventures and adventures for this year.  To kick it all off, I want to share a project that will help ward off the winter blues. I have been in love with copper and marble elements for a while now and decided to combine the two to create a few accessories for my home.  Below are some images that have inspired me. 

Clockwise: 1/ 2/ 3/ 4/ 5

These marble and copper candleholders were created using simple oven-bake clay and leftover copper piping we had lying about.

Supplies:

2 oz. white oven bake clay

2 oz. grey/granite oven bake clay

1” copper pipe

Method:

1: Cut and condition the clay.  I used about 1 part grey/granite to 4 parts white clay.

2: Roll the clay into long snake-like shapes.

3:  Press granite clay into white and fold clay in half.  Fold in half again.

Repeat steps (2) and (3) two more times.

4: Once clay is sufficiently mixed, roll into a ball.

5: Shape clay into a square by flattening the sides, top and base.

6: Insert copper pipe into the center of the clay.

7: Bake following packaging instructions.

I hope these candleholders bring a little light and warmth to your home this winter.  Nicole